Hi,
For your information : I could not wait and installed a trial version of VSAN, with the exact same setup. I only deleted the existing CVM on both hypervisors, imported new ones, and activated them with a trial key.
There was no problem creating the LUNs using the web interface.
I ran the checktargets script, in order to confirm the image paths created, as this was a setting we weren't sure about in the createHA_2 script we have to use with the free version.
(in our case : VSA Storage\mnt\nvme0n1p1\volume1\LUN1\LUN1.img)
I deleted the trial CVMs, and installed back the free CVMs, modified and double checked the createHA_2 script, but again : invalid partner info...
So there is definitively something wrong with the script used in the free version.
I understand the support is limited with the free version, and we could be happy being offered a free version, but why can't we have a sample script with all correct settings ? Ideally, we should only have to modify a few settings only for both nodes, like IP addresses and image path .
I hope we'll be able to test the free version, before considering upgrading to a paid version...
For your information : I could not wait and installed a trial version of VSAN, with the exact same setup. I only deleted the existing CVM on both hypervisors, imported new ones, and activated them with a trial key.
There was no problem creating the LUNs using the web interface.
I ran the checktargets script, in order to confirm the image paths created, as this was a setting we weren't sure about in the createHA_2 script we have to use with the free version.
(in our case : VSA Storage\mnt\nvme0n1p1\volume1\LUN1\LUN1.img)
I deleted the trial CVMs, and installed back the free CVMs, modified and double checked the createHA_2 script, but again : invalid partner info...
So there is definitively something wrong with the script used in the free version.
I understand the support is limited with the free version, and we could be happy being offered a free version, but why can't we have a sample script with all correct settings ? Ideally, we should only have to modify a few settings only for both nodes, like IP addresses and image path .
I hope we'll be able to test the free version, before considering upgrading to a paid version...
Statistics: Posted by thomas_lt — Thu Jul 11, 2024 7:16 am